Warm the rooms
you actually use.

Pros

• +True digital thermostat (41–95°F) with ECO mode that cycles the element to hold temperature
• +70° oscillation spreads heat across a seating area instead of roasting one spot
• +Quiet for a fan-forced heater — low setting is easily bedroom-tolerable

Cons

• −Like every 120V heater, it tops out at 1,500W — roughly 150 sq ft of real heating
• −Slight fan hum on high; silence-obsessed sleepers should look at an oil-filled radiator

Pros

• +Warm and cool mist; warm mode boils the water for sterile output and a little extra comfort
• +Humidity sensor with auto mode — holds a target RH instead of running blind
• +6L tank, up to ~60 hours on low; covers large bedrooms and living areas

Cons

• −Ultrasonic: use distilled water or expect white mineral dust on surfaces
• −Needs weekly cleaning like every humidifier; the warm-mist chamber scales fastest

Pros

• +Dual heating system (quartz infrared + PTC) — heats people directly, then the room
• +Quiet: the blower is rated around 39 dB, far below a typical ceramic fan heater
• +Digital thermostat 50–86°F with auto mode, 12-hour timer, and a remote

Cons

• −Still 1,500W — the '1,000 sq ft' marketing means supplemental heat in a big room, not sole heat
• −Heavy (~19 lb) and boxy; this lives in one room

Pros

• +Recessed (2×6 wall) or wall-mounted — the thin housing works either way
• +750 / 1,500W fan-forced heater with thermostat and timer; flame runs without heat
• +Adjustable flame color, ember-bed color, brightness, and speed; log and crystal media included

Cons

• −Heater is 1,500W like every plug-in — supplemental warmth for ~400 sq ft, not a furnace
• −Flame realism is good, not Dimplex-level; it reads as LED up close